Chrysler / Dodge / Jeep

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

We are proud to announce the highly-anticipated release of the Wavetrac differential to fit 2003-2011 Dodge Viper. The Wavetrac directly replaces the stock Hydra-Lok or Visco-Lok differential without the need to modify the stock stub axles. We supply new, forged chrome-moly stubshafts for a direct fit. Made in USA.

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Available exclusively from
Dusterhoff Tuning (GA)
(404)480-4754

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Wavetrac diffs are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline.

The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!). Super strong 9310 alloy steel gears are enclosed in case-hardened steel bodies, held together with ARP fasteners. All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Requires one RH OEM output flange (Mopar # 68203472AA, not included) and C-clip groove modification/shaft shortening to both flanges for installation (see here and here)
*2 Custom C-clips are included*
*The stock unit uses a viscous coupling that when replaced requires a different OEM shaft (Mopar # 68203472AA) in order to correct the spline depth fitment*

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Wavetrac Differential Made in USA. Fits HAG215 rear axle

Dodge Chrysler:
2005-08 SRT-8 300C / Magnum / Charger
2008 Challenger SRT-8
2009-11 LC / LX 5.7L AT: Challenger / 300C / Charger

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.

Fits: 2009-12 Challenger SRT8 6.1L, 6.4L 2009-12 300C/Charger SRT8 6.1L, 6.4L

Wavetrac Differentials: Modern Engineering for Superior Performance

Designed from a clean sheet, the new Wavetrac Differential brings current gear technology to the market. Internally, its gear tooth forms are optimized for strength and improved oil film retention over competitive designs. Our gear package is smaller, reducing overall mass, yet more durable. Attention was also paid to the side gear/axle interface, putting as much material thickness as possible in this critical area - most important when power levels get high.

Wavetrac differentials are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market with patented technology that mitigates wheelspin when an unloaded wheel condition arises. During zero axle load conditions, the Wavetrac cam device acts to create internal load, maintaining drive on the gripping wheel instead of acting like an open diff (and going nowhere!).

Each Wavetrac Differential is crafted from the highest quality materials available. The internal gears are made from high strength 9310 alloy steel. The diff bodies are machined from case-hardened steel billet. To complete the package, every Wavetrac differential is built exclusively using high quality, high strength fasteners from ARP, the world leader in fasteners.

All Wavetrac differentials include a transferable, Limited Lifetime Warranty.